CX600车铣加工中心的回换刀点过程控制

本文介绍了在CX600车铣加工中心的制造过程中,利用用户程序和Part程序相配合，实现主轴刀具回换刀点过程的控制方案，该方案实际可行，并已用于生产实践。     

《航空工业安全生产标准体系》的编制

通过系统分析航空行业企业安全标准及体系现状,总结行业安全标准体系的编制原则和要求,探讨编制的思路及方法,提出应建立的安全标准体系框架及体系表结构,并对后续工作的开展提出建议。     

Increase in fish abundance during two typhoons in the South China Sea

A fish monitoring program was conducted in the northern region of the South China Sea from March 2009 to December 2010. During this period, two typhoons, GONI and Koppu, hit this region consecutively in August and September 2009. The fish and satellite data were analyzed to understand the influence of the typhoons on fish activities. The results showed that the fish species number (FSN) increased by approximately 14.29% and 14.81% after the two typhoons, GONI and Koppu, respectively. The five increased fish species included three estuarine species and two shallow sea species. However, one shallow sea species was also absent. In the nearshore (near the Pearl River Estuary) and offshore (along the typhoon’s track) regions after GONI, the FSN increased by approximately 24% (nearshore) and 52.63% (offshore), with estuarine species accounting for 42.86% (nearshore) and 33.33% (offshore) of the fish species; after Koppu, the FSN increased by approximately 15.38% (nearshore) and 163.64% (offshore), with estuarine species accounting for 60% (nearshore) and 26.32% (offshore) of the fish species. In the increased records, small and medium-sized fish species were dominant nearshore, and small fish species were dominant offshore. The FSN increased to a maximum value between the 5th and the 10th days after the typhoon nearshore and between the 3rd and 8th days after the typhoon offshore. The results indicated that river discharge, triggered by the typhoon’s nearshore rainfall, as well as offshore upwelling nutrients, also triggered by the typhoons, and may have played important roles in the variability of fish species. This research found that the increase in the FSN was associated with the typhoons in the northern South China Sea.     

Experimental investigation on dynamic response of flat blades with underplatform dampers

One test rig with three blades and two Under-Platform Dampers (UPDs) is established to better understand the dynamical behavior of blades with UPDs. A pre-loaded spring is used to simulate the centrifugal load acting on the damper, thereby achieving continuous adjustment of the pressing load. UPDs with different forms, sizes and materials are carefully designed as experimental control groups. Noncontact measurement via a laser Doppler velocimeter is employed and contact excitation which is performed by an electromagnetic exciter is adopted to directly obtain the magnitude of the excitation load by a force sensor mounted on the excitation rod. Particular attention is paid to the influence of the contact status of the contact surfaces, e.g. the pressure-sensitive paper is used to measure the effective contact area of the UPDs. The experimental variables are selected as the centrifugal force, the amplitude of the excitation force, the damper mass, the effective contact area, and the damper material. The Frequency Response Function (FRF) of the blade under different experimental parameters is obtained by slow frequency sweep under sinusoidal excitation to study the influence of each parameter on the dynamic characteristics of the blade and the mechanism analysis is carried out combined with the experimental results.     

小型航空发动机特点及换热问题综述

首先介绍了小型航空发动机尺寸小、结构紧凑、转子转速高、长度短、工作环境恶劣等特点，然后基于这些特点提出了小型航空发动机在换热领域中进气系统防冰、离心压气机换热、燃烧室换热、涡轮盘换热、涡轮叶片外表面换热和涡轮叶片内换热等独特问题，最后分析了中国小型航空发动机换热领域的现有技术水平和下一步发展方向。     

剥蚀对铝合金疲劳性能的影响

对ＬＣ４ＣＳ和ＬＹ１２ＣＺ铝合金在剥蚀溶液中的腐蚀行为进行了试验研究。分析了发生晶间腐蚀 和剥蚀的原因。通过剥蚀与未剥蚀试件拉伸和腐蚀疲劳对比试验，研究了剥蚀对铝合金材料性能的影响，指出剥蚀后材料微观组织发生了变化。     

复合绝热管气囊成型工艺设计和实验

对两端收口复合绝热管进行了工艺方案分析,确定气囊成型工艺为优选工艺方案,在此基础上阐述了气囊成型工艺设计的原则,依据这个原则开展了典型样件的研制.结果表明：方案选择合理,工艺设计完整、可靠,产品满足各项指标要求.     

论超声速流动中的有益干扰

本文利用三维超声速流动线化理论的积分特性,推出了点源分布和单元旋涡分布的积分关系公式,并利用它们分析了翼下有体,翼上有体和翼的上、下各有一个体等型式的干扰特点,指出了几种可能的有益干扰型式。     

座舱玻璃划伤故障容限研究

确定了座舱玻璃划伤故障模型，得出了MDYB-3玻璃表面裂纹断裂韧度和表面划伤扩展门坎值，建立了座舱玻璃划伤故障剩余强度准则和划伤故障容限计算方法，并给出了9mm厚MDYB-3玻璃划伤故障容限值。为外场划伤故障分析处理提供了简便易行的方法。     

辽中南城市群现代物流一体化发展战略研究

现代物流业的发展为城市群经济的快速发展奠定了基础。在辽中南城市群建设过程中，应该根据自身发展现状来制定物流发展规划。根据实际调研结果、结合相关理论论述了辽中南城市群发展区域物流的优势和劣势，并得出结论认为，企业的信息化发展水平、第三方物流服务和政府管理制度等方面制约了城市群物流一体化建设，同时给出了相关建议。